fabricant de pièces moulées sous pression

Moulage sous pression à chaud

Moulage sous pression en chambre chaude : Une plongée en profondeur dans un processus de fabrication crucial

moulage sous pression
/

Hot Chamber Die Casting is a very effective manufacturing process which is used very widely to produce metal parts to very high precision and an excellent finish on the surface. It is particularly suitable for casting metals with low melting points like zinc, magnesium and some alloys containing lead. It is typified by the fact that the injection system is immersed in molten metal, and so, high-speed cycle times and economy of mass manufacturing are possible. One similar place of comparison always pops up when the castings are considered regarding cold chamber die casting versus hot chamber. Although they are both variations of pressure die casting, they differ so much in terms of design, applications, and compatibility of materials used. An example is the hot chamber die casting, which is high-speed die casting where the furnace has been replaced with a machine. That comes with the limitation of the lower-melting-point metals. Conversely, the cold chamber type of machines is more aptly used with those liquids of a high melting point, such as aluminium and brass, since the hot metal does not come in direct contact with the equipment. Hot Chamber Die Casting process is characterised by minimal waste of material, low costs of labour, and complex shapes manufacture with high tolerances. It is popular in such industries as automotive, electronics, plumbing and consumer products. Nevertheless, the decision on whether to use cold chamber die casting or hot chamber is also dependent on the type of material used and the part design aspect. The article examines the important details of Hot Chamber Die Casting, its parts, materials, process description, constraints, and reasons as to why it is an essential process in the contemporary manufacturing industry. What is Hot Chamber Die Casting? Hot Chamber Die Casting is a metal casting technique where the molten metal is injected into a mould cavity at high pressure. The unique part of the given method is where the injection mechanism is placed: It goes directly to the molten metal. Cycle times and production efficiency are high with this setup, especially in metals of low melting point like zinc, magnesium and some lead alloys. Hot chamber. The name describes the system’s hot chamber as the injection mechanism (a plunger and gooseneck) is in constant contact (filled) with the molten metal area. As the plunger descends, it compresses the molten metal through the gooseneck and into the die cavity. As the metal sets, the mould opens, and the part is ejected, and this process is repeated innumerable times. Hot Chamber Die Casting Process Hot Chamber Die Casting Process is a process of high-precision and speed manufacturing technology utilised in the manufacture of metal parts, where the accuracy of the tool is very important, with great surface finishing. It is most appropriate in the alloys of low melting points; zinc, magnesium, and lead are examples of low melting point alloys. Its main characteristics are short cycle times and great material efficiency. The process is extensive in the manufacturing of a variety of products mainly found in the automotive, electronic, appliance, and hardware industry because of its capability to create complicated ends easily at an affordable per-piece price. The hot chamber die casting process is listed below in a stepwise manner: Hot Chamber Die Casting Process- Step by Step Overview 1. The Metal is melted It starts with the molten moulding of the metal (which is usually zinc or magnesium), in an incorporated furnace of the die casting machine. The molten metal is kept at a constant temperature within the metal pot that is directly connected to the casting machine. This unending heat provision ensures that the casting processes are continuous. 2. The process of filling the Injection System In hot chamber systems, there is a portion of the molten metal with a part of a component known as the gooseneck submerged. The plunger, which runs inside the cylinder of injection, is pulled backwards to a position where the molten metal may gush down to the gooseneck into the inlet hole of injection. The next step will involve injecting this metal into the die cavity. 3. Molten Metal injection When the gooseneck is filled, the plunger is either pushed forward by hydraulic or pneumatic pressure, which forces the molten metal through the gooseneck channel into the mould cavity (also called the die). This is done at a high rate and pressure to make sure that the cavity is totally filled before the metal begins to harden. 4. Casting and solidifying in the mould This hot metal in the die is quickly cooled down by the comparatively cold steel of the mould. Solidification takes several seconds, based on the size and complexity of the part. In this step, die cooling channels assist in the removal of heat to ensure that the cycle speed is not reduced and defects such as shrinkage or porosity are avoided. 5. Ejecting and opening of the mould Once the metal has been solidified, the die halves are opened. The ejector system is placed on the movable half of the mould, and it operates under force via the use of ejector pins and forces the completed casting out of the cavity. It is ensured that the part can come out without being damaged during ejection. 6. Secondary operation and Trimming After it is ejected, the piece might contain an extra material called flash, runners or sprues. These are either hand-trimmed or auto-trimmed. The part can be processed further depending on the application, like surface finishing, machining or coating. 7. Repeat Cycle The machine clears and cleans up to be used again. Hot chamber die casting is characterised by having such a quick cycle time, sometimes creating a few finished parts in just 10 to 20seconds according to the complexity and size of the part. Cycle Time and Efficiency The speed is the greatest advantage of the process of hot chamber process. Hot chamber machines. Unlike cold chamber die casting, where the metal has to be ladled

Moulage au sable de l'aluminium

Une analyse technique complète du moulage au sable de l'aluminium dans la fabrication moderne

fonte d'aluminium
/

Aluminum sand casting is one of the oldest and most versatile metal casting processes, widely used in modern manufacturing to produce complex, durable, and cost-effective components. Aluminum Sand casting Manufacturers can generate complex geometries with intricate features that would have otherwise been either impractical or unprofitable to machine out of solid material through pouring molten aluminum into prepared sand molds. This method is especially suitable in low to medium-volume production, prototyping, and high structural castings on applications spanning the aerospace, automotive, defence, and energy industries. The most interesting about the sand-casting aluminum is that it is both flexible and functional. Aluminum has a very good strength versus weight, corrosion resistance, and recyclability, and thus makes it an excellent casting material. Together with the thermal resistance of sand and its high moulding capability, the process provides scalable production capability with excellent dimensional accuracy. Pattern design, the makeup of the mold, the quality of the melt, and gating design are key factors to the success of every casting. An excellent foundry of aluminum sand castings has to control not only the classic facts in metal technology but also touch on innovations in the processes. The current facilities apply the latest technology to prevent defects and ensure the best performance of the casting by using 3D sand printing, simulation software, and real-time process monitoring. Precision-engineered and casting aluminum parts are now capable of meeting stringent engineering standards for safety, tolerance, and durability. As demand grows for complex components with faster lead times and lower environmental impact, professional aluminum sand casting services must continue evolving. This article goes into the technical ins and outs of the process itself, its engineering workflow, materials, challenges, innovations, and so on. The Fundamentals of Aluminum Sand Casting At its core, aluminum sand casting involves pouring molten aluminum into a sand mold cavity, which is shaped by a pattern that replicates the final part’s geometry. When the aluminum solidifies, the sand mold is shaken off, leaving the cast piece. The process also has an outstanding dimensional flexibility and scalability capability in high-mix low-volume manufacturing conditions. The process is based on the use of a non-permanent mould, sand, that may be recycled and re-utilized, minimizing the waste of materials and expenses. Sand molds most commonly consist of silica sand with a binder added, and the nature of the binder system generally influences considerably the resulting surface finish, dimensional accuracy, and rate of cooling. The process of Flow in the Engineering of Sand Casting Aluminum Sand casting aluminum is an engineering process that consists of a set of accurately calibrated activities that aim at transforming raw aluminum into specific, well-built, and accurately dimensioned parts. Both the material and mechanical expertise are required to be in-depth to make all of the stages of the process successful. The following is a step-by-step analysis of the way in which sand casting of aluminum is implemented professionally and technically. 1. Pattern Design and making In the sand casting aluminum process, the initial step is designing and manufacturing the pattern, a physical copy of the final casting. The allowances that must be included in patterns are rather critical, such as shrinkage, draft, and machining stock. As aluminum contracts, during cooling patterns are laid out a little bigger than the finished component. The shrinkage rate of aluminum alloys is normally applied at 1.3 per cent; however, depending upon the alloy and the conditions of cooling, it may vary. Vertical portions of moulds are given draft angles, normally a few degrees between 1 and 3, to ensure that the pattern can be removed easily in the sand mold, being careful not to destroy the cavity. Additional allowances (machining allowances) are included such that there is no adverse interaction between the post-processing and the final part. Patterns may be made out of wood, metal, resin, or even 3D-printed polymer materials, depending on the accuracy demands and the needs of the production volume. 2. Mold Making (Molding and Core Setting) After preparing the pattern, the mold is to be prepared. For the sand cast, aluminum mold, there are two separate halves: the cope (upper half) and the drag (lower half). They are produced by stuffing the sand around the mold in a flask. Depending on the application, the sand is generally silica-based and is amalgamated with binders such as clay (green sand) or chemical resins (no-bake sand). In case the part design has internal space and hollow parts, it necessitates the use of sand cores. They are placed in the mold cavity, after which the metal is poured. Cores can be fabricated using core boxes, and in precision production, they can be printed with greater precision using 3D sand printing. The exact footprint of the core is very important in order to have a rigid structure and adherence to the final part dimension. 3. The Design of the Gating System The timeliness and effectiveness of the gating system formed are significant towards the success of the process of sand casting aluminum. This system consists of a pouring basin, sprue, runners, and gates, which coerce the impounded aluminum into the involvement of the mold. Adequate gating will prevent a lot of turbulence, minimize airlock, and also make sure that there is an even fill. Risers (alternatively called feeders) are also required, and these can be seen as a reservoir of molten metal that offsets the direction of shrinkage that comes after solidification. Casting simulation software is usually utilized by engineers to study and optimize the gating and riser systems. Prediction takes place by using simulation tools such as MAGMASoft or ProCAST so that typical defects such as cold shuts, misruns, and shrinkage porosity can all be corrected virtually before any production takes place. 4. Cu Melting and Metal Treating Aluminum is usually melted by a reverberatory furnace, a crucible furnace, or an induction furnace, and the choice depends on the batch volume, alloy needs, and the amount of energy needed. The melting temperature of pure aluminum is about 660 degrees

Soudage TIG de l'aluminium

Soudage TIG de l'aluminium : Guide technique complet

fonte d'aluminium
/

TIG Welding Aluminum is widely regarded as one of the most technically demanding processes in the field of welding. When working with aluminium, the metal that is characterised by its light weight, corrosion resistance, and high conductivity, a set of unprecedented problems emerges, which distinguishes it so much in terms of steel or stainless steel. Poor handling of aluminum can cause the natural oxide layer to provide a weak, porous, or otherwise structurally undesirable weld due to its natural oxide level, low melting point and its ability to absorb hydrogen gas. Thus, the TIG (Tungsten Inert Gas) process, or the Gas Tungsten Arc Welding (GTAW) process, is the process of choice by the industry to use in instances when precision, aesthetics, and weld integrity are the main factors. These will cover the behaviour of materials, selection of equipment, choice of shielding gas, joint preparation and troubleshooting methods, although much emphasis will be placed on quality control and repeatability. Additionally, the article will detail how to correctly select and operate an aluminum tig welder, manage various types of aluminum welding parts, and produce consistent, defect-free joints when attempting to weld aluminium TIG. By the end, the reader will have a thorough knowledge of how to create a good, clean, structurally good-looking tig-welded aluminium assembly as per the industry standard in the aerospace, automotive industry, marine industry, as well as the manufacturing industry.  This article discusses the science, methods as well and practical aspects of TIG welding on aluminium. It is meant to be used by experts and technically trained people who want to extend their knowledge about the welding of aluminium in high-performance or industrial processes. What is TIG Welding Aluminum? TIG Welding Aluminum refers to the process of joining aluminium components using Tungsten Inert Gas (TIG) welding, also known as Gas Tungsten Arc Welding (GTAW). Here, an electric arc is generated by a non-consumable tungsten electrode and aluminium base metal and a filler rod are melted in a protective cover of inert gas, usually argon. Since aluminium has high thermal conductivity, low melting point and a high melting oxide layer, welding aluminium has unique colouring, and drying must be done carefully. TIG welding has a situated control of heat input and weld puddle, which means it is perfect in thin materials, advanced assemblies and other high-performance applications. The aerospace, automotive, and marine industries, among others, use TIG welding to manufacture resistant, non-corrosive, and neat-looking welding video. Successful “TIG Welding Aluminum” requires skilled technique, proper equipment, and careful surface preparation to ensure weld integrity and strength. Why Aluminum TIG Welding? Gas Tungsten Arc Welding (GTAW), which is also known as Tungsten Inert Gas (TIG), is the ideal technique to use where precision, control and a fine look are requisite. It offers unparalleled control in the amount of input heat so that welders have the opportunity to control the fluidity of the weld pool of the aluminum. The TIG welding, when utilized with aluminum is quite convenient mainly because: Welding aluminum involves a better understanding of its physical and chemical properties and which are much different compared to other widely used metals. Below are the key challenges associated with TIG Welding Aluminum. 1. Very High Thermal Conductivity Aluminum carries heat 5 times than steel. This means that heat dissipates quickly from the weld zone, requiring higher amperage when attempting to weld aluminium TIG, especially with thick materials. When not done best can end up in gap fusion or irregular weld penetration. 2. Oxide Layer Problems When aluminum surfaces are exposed to air, a layer of oxide (reliably adherent) forms instantly, and it is thin. This layer is melted at approximately 2050 °C, which is well above the base metal melting point of aluminium, which is 660 °C. TIG welding, when AC mode is used, assists in breaking this layer, but it is also important that pre-cleaning is done to produce high-quality TIG-welded aluminium. 3. Hydrogen Porosity Susceptibility Hydrogen readily absorbs in molten aluminum, and this can create porosity or cause cracks during cooling. Oil, moisture, or dirty filler rods acted as a source of contaminants that caused the hydrogen to get into the weld pool. Proper cleaning and using dry filler rods are essential to avoid defects in aluminum welding parts. Technical Summary Table for TIG Welding Aluminum Here is a comprehensive technical table summarising the key aspects of TIG Welding Aluminum, including welding parameters, joint types, common defects, and how to manage them. In this table, you combine the ideas of your article, and it is original and highly technical. Category Technical Detail Recommendations / Parameters Base Material 1xxx to 6xxx aluminum alloys are most commonly TIG welded Clean all surfaces before welding; avoid 7xxx for high-crack sensitivity Main Process TIG Welding Aluminum using alternating current (AC) Use an inverter TIG with AC balance, high-frequency start, and stable arc control Primary Keyword Weld aluminum tig Use appropriate AC balance and amperage; optimize puddle control and filler deposition Electrode Type 2% Lanthanated or Ceriated Tungsten (1/16″, 3/32″, or 1/8″) Sharpen to a truncated point or ball tip (for AC), depending on application Shielding Gas High-purity Argon (99.99%) Flow rate: 15–20 CFH; add Helium for thicker materials or deeper penetration Filler Rods ER4043, ER5356 Match filler to base alloy and application (ER5356 for strength, ER4043 for crack resistance) Joint Types Butt, Lap, T, Corner Design with small gaps (~1/16”) and allow for thermal expansion Weld Preparation Degrease + stainless steel wire brush No touching after cleaning; remove the oxide layer before welding Torch Technique Short arc length (<1/8”), 10–15° travel angle Keep filler outside the arc cone to prevent oxidation Amperage Settings 1 amp per 0.001” thickness baseline 60–130 amps for most thin-to-mid aluminium applications AC Frequency Controls the arc focus 120–200 Hz for clean, narrow arc on thin aluminum welding parts AC Balance 70% EN / 30% EP typical Adjust toward more EN for deeper penetration; more EP for cleaning oxide Tip: Make sure to calibrate your aluminum tig welder properly

Moulage sous pression de l'aluminium

Fabricant de pièces moulées sous pression en aluminium et IATF 16949

moulage sous pression de l'aluminium
/

Modern manufacturing uses aluminium high-pressure die casting to make parts that are strong, light, and have many complex shapes. The reason automotive, aerospace, telecommunications, and consumer electronics all use it is that it can do both mass production and create very accurate pieces. Because the demand for quality aluminium high-pressure die-cast parts keeps increasing, it is important to deal with a well-known and certified supplier. In this area, the IATF 16949 certification is very important because it is a respected quality management standard used worldwide in the automotive industry. Such certification guarantees that quality control, proper risk handling, and continuous improvement are used during every stage of manufacturing. A certified aluminum die-casting and ISO 16949 company demonstrates its commitment to consistent product quality and customer satisfaction. Being a high precision die casting manufacturer and ITAF 16949 means meeting rigorous international standards and having the processes in place to minimize defects, enhance production efficiency, and ensure complete traceability of components. They can meet Tier 1 suppliers and OEMs by delivering components that exactly follow the business’s specifications. In addition, complying with aluminum die casting and 16949 standards means a manufacturer can meet expectations worldwide, mainly in areas where it is important to focus on safety and secure performance. Working with a suitable aluminium die casing partner that has IATF 16949 certification benefits your products, helps cut costs in the future, and strengthens the links in your supply chain. This article looks into how an aluminium high-pressure die casting manufacturer follows the IATF 16949 standard and its role. Aluminium High Pressure Die Casting  Aluminium high-pressure die casting helps make metal parts that are accurate in shape and have a perfect non-porous surface. When molten aluminium is injected into a steel mold at high pressure, it makes it possible to quickly fabricate complex parts and reduces later processing steps. Because it is strong and light, aluminium is widely used in many industries. The products made from this process are commonly seen in cars’ engines, housings, and brackets. For any aluminum die-casting and ITAF 16949 certified operation, maintaining the integrity of this process is vital to both quality and compliance. How IATF 16949 Helps in Die Casting? IATF 16949 is an international standard made for cars, and it uses quality management to ensure the reliability of products and their processes. Continuous development, prevention of quality issues, and lowering waste in the supply chain are the main elements of the system, which was created by the International Automotive Task Force. For manufacturers engaged in aluminum die-casting and ISO 16949 certification, certification is not just a regulatory requirement; it’s a badge of trust. It guarantees that the manufacturer follows quality rules that are respected everywhere. Besides, since IATF 16949 matches ISO 9001, it ensures full and proper quality management. Why is aluminium used in High Pressure Die Casting? Die casting benefits a lot from aluminium due to its ability to resist corrosion, its strong thermal conductivity, and being lighter than other metals like steel and brass. Because of these qualities, this material is suitable for cars since both light weight and performance depend on fuel efficiency. An IATF 16949 certification shows that all of these benefits are achieved by the business. For instance, manufacturers focusing on “high precision die casting manufacturer and ISO 16949 standards can assure customers of consistent product performance and minimal variance in production. What Makes an Aluminium Die Casting Manufacturer Reliable? Selecting a competent manufacturer is very important for firms doing aluminium die casting. A manufacturer should not only have the necessary know-how but also follow all quality standards. These are some of the essential traits you should notice: Using Precision in Die Casting Good die casting depends mostly on precise engineering. It confirms that components follow the tight guidelines of both dimensions and performance. Manufacturers who identify as high precision die casting manufacturers and ITA 16949 go to great lengths to implement exacting standards across the design and production cycle. Because of CAD/CAM software, quality inspection, and automated processes, production is kept as close as possible to the specific requirements. For applications like transmission housings, electronic enclosures, and important car components, the exactness needed is very important. Why Managing Quality Is Important? A well-structured quality management system (QMS) makes it possible to produce the same quality goods all the time. In the aluminium die casting industry, following the principles of IATF 16949 gives a way to control processes, reduce risks, and improve constantly. By following IATF 16949, a high precision die casting manufacturer and itaf 16949 ensures not only quality but also traceability and accountability. Everything is checked and confirmed along the supply chain to lower the chances of issues and defects. Below is a detailed and professional table that outlines key aspects of Aluminium High Pressure Die Casting Manufacturer and IATF 16949, integrating relevant information across different categories such as process, benefits, certification, and industry relevance. This table is ideal for use on a website, brochure, or presentation. Aluminium High Pressure Die Casting & IATF 16949 – Comprehensive Overview Category Details Manufacturing Process Aluminium is melted and injected into a steel mold under high pressure, producing complex shapes with excellent dimensional accuracy. Key Material Used Aluminium alloys (e.g., A380, ADC12, AlSi10Mg) are known for their strength, light weight, and thermal conductivity. Application Industries Automotive, Aerospace, Electronics, Industrial Equipment, Telecommunications, Consumer Goods. Advantages of Aluminium Die Casting – Lightweight components- High strength-to-weight ratio- Excellent surface finish- High-volume efficiency- Corrosion resistance Importance of Precision Tight tolerances and fine details can be achieved, ideal for engine parts, housings, connectors, brackets, and structural components. What is IATF 16949? A global quality management standard for the automotive industry, based on ISO 9001 with additional requirements specific to auto manufacturing. Benefits of IATF 16949 Certification – Consistent product quality- Risk-based thinking- Defect prevention- Better customer satisfaction- Competitive advantage Why Certification Matters Ensures traceability, standardized procedures, regulatory compliance, and ongoing performance improvement. Target Clients OEMs, Tier 1 & Tier 2 automotive suppliers, industrial system designers, and

Entreprises de moulage sous pression de véhicules automobiles en Chine et dans le monde

Entreprises de moulage sous pression de véhicules automobiles en Chine et dans le monde

fonte d'aluminium, entreprises de moulage sous pression
/

L'avenir de l'industrie automobile est largement influencé par l'essor du moulage sous pression. Les composants de moteur, les boîtiers de batterie pour les véhicules électriques et d'autres pièces fabriquées par moulage sous pression sont essentiels pour obtenir des véhicules solides, précis et plus légers. Étant donné que les gens achètent de plus en plus de véhicules électriques et économes en carburant, les entreprises de moulage sous pression sont à la pointe du progrès et des solutions à grande échelle dans ce domaine. La Chine, plus que tout autre pays, est devenue un acteur de premier plan dans le domaine du moulage sous pression grâce à ses outils avancés, sa main-d'œuvre qualifiée et ses coûts de fabrication abordables. Les entreprises leaders dans ce domaine sont Sincere Tech, CNM Tech Co. Ltd. et GC Precision Mould Co. Ltd. qui s'occupent de la conception des moules ainsi que de l'usinage CNC et de la finition des surfaces. Grâce à des contrôles de qualité et à un prototypage rapide, ces entreprises fabriquent un grand nombre de pièces, ce qui attire les constructeurs automobiles locaux et internationaux en tant que partenaires. Présentes dans différents pays, des entreprises comme Wisconsin Aluminium Foundry (États-Unis), Get It Made (Royaume-Uni) et MES Inc. (États-Unis) sont en train de changer l'industrie. Des décennies d'expérience, des certifications ISO 9001 et IATF 16949 et un souci d'écologie et d'innovation permettent à ces entreprises de répondre aux attentes accrues des constructeurs automobiles en matière de précision, de fiabilité et de respect de l'environnement. L'article met en évidence certains acteurs clés à l'origine des changements dans l'industrie du moulage sous pression automobile. En raison de tendances telles que l'électrification, la numérisation et l'utilisation de méthodes durables, les entreprises de moulage sous pression du monde entier, y compris en Chine, sont considérées comme des acteurs principaux pour atteindre l'excellence dans les voitures. 1. Sincere Tech Année de création : 2005Nombre d'employés : 100-200Type d'entreprise : Sincere Tech est l'un des plus grands fabricants chinois de moules d'injection plastique, de moulage sous pression, d'usinage et d'assemblage. Site web et contact Site web : https://plas.co/Phone : +86 135 30801277Email : steve@sincere-tech.comAddress : Rm101, N041, Donghu road, JingLian cun, Qiaotou town, Dongguan City, Guangdong Province, China. 523000. Profil de l'entreprise Fournisseur chinois de moules d'injection plastique et de services de moulage, Sincere Tech figure parmi les entreprises les plus importantes de Chine. Depuis 2005, cette entreprise résulte de la combinaison de l'emboutissage du métal et du plastique, des moules d'injection plastique de précision, de l'usinage CNC, du moulage sous pression et du moulage de silicone. Des machines de pointe, la protection des informations par des accords de confidentialité, des prix équitables et près de deux décennies d'excellente production attendent nos clients chez Sincere Tech. Le moulage par injection est utilisé pour des machines de 60 à 1800 tonnes destinées à des industries telles que l'électronique, le médical, l'automobile ou les cosmétiques, et ses pièces pèsent de moins d'un gramme à 8 kilogrammes. Leurs engagements en matière de qualité supérieure Conformément aux normes ISO 9001:2015 et ISO 9000:2015, Sincere Tech a pour objectif de fabriquer des produits acceptés dans le monde entier. Le souci de la qualité a permis à l'entreprise de créer une énorme demande, si bien qu'elle exporte ses produits en Finlande et dans un certain nombre d'autres pays. Parmi les entreprises qui offrent des services similaires, Sincere Tech est reconnue comme un partenaire fiable et innovant pour le moulage par injection de plastique. Pourquoi nous choisir ? 2. CNM Tech Co. Année de création : 20+Nombre d'employés : 100-200Type d'entreprise : CNM Tech Co. est une entreprise de fabrication de précision spécialisée dans le moulage sous pression, l'usinage CNC et les services d'assemblage. Site web et contact Site web : https://www.thediecasting.com/Contact : +86 13045898002Email : sales@thediecasting.comAddress : Adresse de l'usine : Rm 101, No.40, Donghu Road, Jinglian, Qiaotou town, Dongguan city, Guangdong Province, China. 523520. Profil de l'entreprise Thediecasting.com est le domaine officiel sous lequel opère CNM Tech Co., Ltd, un fabricant chinois exceptionnel de solutions de moulage sous pression. La société est une entreprise chinoise de moulage sous pression d'aluminium, de magnésium et de zinc, d'usinage CNC, de finition de surface et d'assemblage, dont le siège social se trouve à Dongguan, en Chine. CNM Tech a plus de 20 ans d'expérience dans les domaines de l'automobile, de l'aérospatiale, de l'électronique, etc. En raison de la haute précision de la fabrication, son atelier d'outillage interne et ses machines CNC de pointe garantissent également la qualité de ses produits. CNM Tech propose tous les types de polissage, de sablage, de revêtement en poudre, de peinture à l'huile, etc., avec des produits de finition de haute qualité répondant aux besoins des utilisateurs du monde entier. Leurs engagements en matière de qualité CNM Tech Co., Ltd. fournit les documents ISO 9001:2008, TS16949 et ISO 14001:2015. Dans la plupart des cas, ces documents vous donneront l'assurance que la gestion de votre entreprise est de premier ordre et garantiront également la conformité avec les normes de l'industrie automobile et les activités respectueuses de l'environnement entreprises par l'entreprise concernée. Grâce au respect strict des réglementations en matière de qualité et d'environnement, CNM Tech fournit d'excellentes solutions de moulage sous pression avec un impact minimal sur l'environnement, et jouit d'une excellente réputation sur le marché. Pourquoi nous choisir ? 3. GC Precision Mould Co, Ltd. Année de création : 1999Nombre d'employés : 100-200Type d'entreprise : Notre société, GC Precision Mould Co., Ltd, fait du moulage sous pression d'aluminium, de zinc et de magnésium, de l'usinage CNC et du moulage par injection de plastique. Site web et contact Site web : https://aludiecasting.com/Contact : +86 131 4886 5556Email : info@aludiecasting.comAddress : Adresse de l'usine 1 : No. 30 Huan Zhen Rd, Qi Shi Town, Dongguan City, Guangdong Province, China, 523516 Profil de l'entreprise GC Precision Mold Co, Ltd, opérant sous Aludiecasting.com, est un site de fabrication de pièces moulées sous pression et d'usinage de précision qui est l'un des principaux fabricants chinois. L'entreprise a été fondée en 1999 et ses services comprennent le moulage sous pression de l'aluminium, du zinc et du magnésium, le moulage par injection de plastique, l'usinage CNC et la finition de surface. Elle dispose de machines de pointe telles que des machines de moulage sous pression (120 - 1600 tonnes) et des machines de moulage par injection (80 - 2800 tonnes) connectées à des industries telles que l'automobile, l'aérospatiale et l'électronique. L'entreprise applique une politique de qualité très stricte afin de fournir des solutions de fabrication exactes, durables et moins chères dans le monde entier. Engagements en matière de qualité GC Precision Mold Co. Ltd fournit les meilleures solutions de moulage sous pression et d'usinage, conformément à la certification ISO 9001. Son contrôle de la qualité est si strict qu'elle teste la précision, les machines CMM, les rayons X et les spectromètres pour garantir un produit fiable. Grâce au respect strict des normes internationales, l'entreprise garantit la livraison de composants cohérents et de haute qualité, avec un minimum de réclamations de la part des clients en raison de l'aspect de la fiabilité, pour les raisons indiquées dans chaque projet. Pourquoi choisir GC Precision Mould Co, Ltd ? 4. Get It Made Année de création : 2011Nombre d'employés : 50-100Type d'entreprise : Fabricant et fournisseur de pièces automobiles moulées sous pression. Site Web et contact Site Web : https://get-it-made.co.uk/ Courriel : team@get-it-made.co.ukContact : +44 (0)20 3286 6002Adresse : Get It Made Ltd, Unit 1 Southbrook Mews, London SE12 8LG. Profil de l'entreprise Get It Made a été créée à Londres,

Entreprise de moulage sous pression d'alliages en Chine et dans le monde 

Entreprise de moulage sous pression d'alliages en Chine et dans le monde 

moulage sous pression, entreprises de moulage sous pression, société de moulage sous pression
/

Le moulage sous pression d'alliages est utilisé pour produire des pièces métalliques compliquées qui nécessitent des tolérances serrées et une très bonne finition. Il joue notamment un rôle majeur dans les secteurs de l'automobile, de l'aérospatiale, de l'électronique, de la défense, des appareils médicaux et des produits de consommation. Partout dans le monde, les fabricants travaillent ensemble, et la Chine est le chef de file de cette industrie parce qu'elle dispose d'une infrastructure solide, d'un personnel bien formé et de prix avantageux. CNM Tech Co. Ltd, Sincere Tech et GC Precision Mould Co. Ltd sont des entreprises bien connues dans le secteur du moulage sous pression en Chine, et toutes s'occupent de la conception des moules, de l'usinage CNC et de l'assemblage final. Ces fabricants utilisent les technologies les plus récentes et respectent les normes de qualité internationales telles que la norme ISO 9001. La plupart de leurs services s'adressent à des clients internationaux, ce qui leur confère un rôle majeur dans les réseaux d'approvisionnement mondiaux. Des entreprises telles que Nemak (Mexique), MRT Castings Ltd et Haworth Castings (Royaume-Uni), et PHB Inc. (États-Unis) sont de bons exemples de technologies avancées de moulage sous pression en dehors de l'Asie. L'innovation, la durabilité et la production de précision sont au cœur des préoccupations de ces entreprises, qui fournissent les secteurs de l'aérospatiale, de la médecine et des véhicules électriques, qui sont soumis à des réglementations strictes. Ces deux entreprises se distinguent des autres par leur haut niveau de qualification et l'importance qu'elles accordent à la qualité, au service à la clientèle et aux changements écologiques. L'article présente plusieurs grandes entreprises de moulage sous pression en Chine et dans le monde, en soulignant leurs principales qualités, leurs points forts et les raisons pour lesquelles elles réussissent bien sur ce marché. Quelle que soit la région du monde où vous cherchez à externaliser, les profils présentés vous donneront des conseils utiles sur les meilleurs choix à faire. Moulage sous pression d'alliages Lors du moulage sous pression d'alliages, un alliage métallique liquide est pressé avec une grande force dans des matrices en acier, qui peuvent être réutilisées plusieurs fois. Cette méthode de production permet de créer des pièces métalliques dont les dimensions sont très précises, qui sont lisses et qui peuvent être produites très efficacement. Principales caractéristiques du moulage sous pression d'alliages : 1. Alliages utilisés : La plupart de ces procédés reposent sur des alliages de métaux non ferreux, tels que l'aluminium, le zinc et le magnésium, qui présentent des avantages importants en termes de poids, de solidité, de résistance à la corrosion et de conductivité thermique. 2. Aperçu du processus : La fusion de l'alliage se fait ensuite en plaçant le matériau dans un four. Un moule en acier trempé reçoit le métal en fusion, qui entre dans une machine de coulée sous pression. 3. Types de moulage sous pression : Voici les principaux points forts du moulage sous pression d'alliages : Applications courantes : 1. CNM Tech Co. Année de création : 20+Nombre d'employés : 100-200Type d'entreprise : CNM Tech Co. est une entreprise de fabrication de précision spécialisée dans le moulage sous pression, l'usinage CNC et les services d'assemblage. Site web et contact Site web : https://www.thediecasting.com/Contact : +86 13045898002Email : sales@thediecasting.comAddress : Adresse de l'usine : Rm 101, No.40, Donghu Road, Jinglian, Qiaotou town, Dongguan City, Guangdong Province, China. 523520. Profil de l'entreprise La fabrication de composants de précision en aluminium et en zinc moulés sous pression est la spécialité de The Die Casting Company. L'entreprise offre des services de moulage complets en disposant des capacités nécessaires pour la conception des moules, l'outillage, l'usinage CNC, la finition des surfaces et les tests de qualité, le tout en interne. Au service des secteurs de l'automobile, de l'électricité et des machines industrielles, elle réunit des connaissances en ingénierie et des certificats ISO 9001. Avec l'aide de la technologie moderne et d'une approche conviviale, The Die Casting Company offre des performances élevées, une production à faible coût et une qualité constante. Codeplay, dont le siège est en Inde, fournit une assistance personnalisée et des livraisons ponctuelles à ses clients dans le monde entier. Engagement en faveur de la qualité Chez The Die Casting Company, la qualité est au cœur de toutes les tâches. En commençant par le contrôle des matières premières, l'entreprise applique des procédures strictes de contrôle de la qualité jusqu'à l'essai des produits finis. Parce qu'elle est conforme à la norme ISO 9001, ses installations utilisent les équipements les plus récents et disposent d'une équipe de travailleurs qualifiés. Les mesures, la résistance et l'aspect de chaque pièce moulée sont soigneusement vérifiés afin de répondre aux besoins du client et aux exigences de l'industrie. Grâce à cet engagement, les clients sont satisfaits, les produits sont fiables et la confiance s'installe durablement. Pourquoi notre entreprise ? 2. Sincere Tech Année de création : 2005Nombre d'employés : 100-200Type d'entreprise : Sincere Tech est l'un des plus grands fabricants chinois de moules d'injection plastique, de moulage sous pression, d'usinage et d'assemblage. Site web et contact Site web : https://plas.co/Phone : +86 135 30801277Email : steve@sincere-tech.comAddress : Rm101, N041, Donghu road, JingLian cun, qiaotou town, Dongguan City, Guangdong Province, China. 523000. Profil de l'entreprise Fondée en 2005, Sincere Tech (plas.co) est devenue l'un des principaux fournisseurs chinois de moules d'injection plastique personnalisés et de services de moulage. Forte de ses 18 années d'expérience dans ce domaine, l'entreprise est capable de fournir des solutions complètes telles que la conception de moules, l'usinage CNC, le moulage sous pression, le moulage en silicone et l'assemblage. Travaillant dans les domaines de l'électronique, de l'automobile, de la médecine et de l'électroménager, Sincere Tech s'appuie sur des machines de haute technologie, telles que des CNC à 5 axes et des CMM, pour garantir la précision et la qualité de ses produits. Respectant les normes internationales, l'entreprise se conforme aux certifications ISO 9001:2015 et QS 9000:2015, ce qui garantit aux clients des produits de qualité dans le respect de leur budget. Engagement en faveur de la qualité Chez Sincere Tech, tout doit être fait dans un souci de qualité. L'entreprise utilise les normes ISO 9001:2015 et QS 9000:2015 pour la fabrication de tous ses produits. Grâce à des outils modernes et à des règles strictes, Sincere Tech garantit que tous ses produits sont fabriqués exactement selon les spécifications. Tous les processus, de la conception à l'assemblage, sont étroitement surveillés pour s'assurer que les pièces sont solides, précises et qu'elles rendent les clients heureux, ce qui explique le respect de l'entreprise par l'industrie. Pourquoi notre entreprise ? 3. GC Precision Mould Co, Ltd. Année de création : 1999Nombre d'employés : 100-200Type d'entreprise : Notre société, GC PrecisionMould Co., Ltd, fait du moulage sous pression d'aluminium, de zinc et de magnésium, de l'usinage CNC et du moulage par injection de plastique. Site web et contact Site web : https://aludiecasting.com/Contact : +86 131 4886 5556Email : info@aludiecasting.comAddress : Adresse de l'usine 1 : No. 30 Huan Zhen Rd, Qi Shi Town, Dongguan City, Guangdong Province, China, 523516 Profil de l'entreprise GC PrecisioMould Co. a été créée en 1999 et est devenue l'un des principaux fournisseurs mondiaux d'arts de la fonte sous pression et de produits usinés à partir de métaux non ferreux. Fireray Precision Equipment est présent dans l'industrie depuis plus de vingt ans et se consacre principalement au moulage sous pression de l'aluminium, au moulage sous pression du zinc, au moulage au sable du bronze, au moulage par gravité de l'aluminium et à l'usinage de précision à commande numérique par ordinateur. Basée à Dongguan City, dans la province de Guangdong, en Chine, GC PrecisionMould Co.

Pourquoi les principaux fabricants préfèrent-ils les pièces automobiles moulées sous pression en aluminium ?

Pièces automobiles moulées sous pression en aluminium : Pourquoi les principaux fabricants préfèrent-ils

moulage sous pression de l'aluminium
/

Aluminum Die Casting Auto Parts are now a common practice for industry-leading designs of engine blocks, transmission housings and a wide range of brackets. The method makes it possible to include complex designs and ensures both lightness and durability in parts crucial for strong performance and better fuel efficiency. Because it is fast and produces very little scrap waste, aluminum die casting is widely used by automakers everywhere. Auto diecasting is essential when building parts for modern cars. This manufacturing process melts aluminum into shapes required by dies, since the moulds are strong and reusable. The increasing emphasis on improved and more energy-efficient vehicles has caused companies to use more aluminum. Producing these parts dependably at a high level of accuracy often depends on aluminum die casting. The auto diecasting parts manufacturer is central to these manufacturing developments. Because electric vehicles and hybrids are getting more common, manufacturers will need more aluminum components that are both light and don’t rust or corrode easily. Because of these qualities, aluminum die casting is important to the development of transportation technology. In this article, we will cover the auto diecasting process, its advantages, common applications in automobiles and how leading die casting manufacturers make outstanding diecasting parts for today’s vehicles. What Exactly Is Aluminum Die Casting? Aluminum die casting happens when molten aluminum is pushed under high pressure into a cavity in a mould. Generally, the mould consists of hardened tool steel and shapes repeatable forms of high precision. As soon as the casting is solid and cool, the die is opened so the cast can be removed. Key Features: What Makes Die Casting With Aluminium Useful? Aluminum die casting enables producers to make high-quality components at reasonable and flexible costs. Main Benefits: When several features are present, numerous components can be assembled together into one unit. What is Auto DieCasting? Auto diecasting is the process of forcing liquid aluminum into special die or mold to shape automotive components. Many consider it known for producing extremely detailed and correct parts to tight tolerances. Because it is faster, cleaner and less costly, “auto diecasting” is now used instead of other approaches to make many vehicle components. High quality Steel dies or die casting molds are used in the manufacturing process, allowing them to handle the heat used over and over again. The cooling and ejection of the demolded aluminum part are simple, so very little finishing is needed. Therefore, the process achieves greater efficiency than machining and similar metal-forming techniques. The need for using auto die casting increases as auto designers and engineers try to build lighter, more efficient vehicles with aluminum. Uses of Aluminum Die Casting The reason aluminum die casting is important in several sectors is that it creates parts that are both strong, light and very precise. Since it performs very well mechanically, aluminum is highly appreciated in fields that demand top performance, lasting use and unique geometry. You’ll find ceramics in cars, planes, electronics, appliances and other equipment, and these applications are always increasing. Automotive Industry Aluminum die-cast parts are used most by the automotive industry. The use of this method grows as it helps manufacturers cut vehicle weight, improve mileage and fulfil tight environmental rules. Part of any auto engine, transmission, cylinder head, suspension unit or support structure may be made of aluminium. Increasing numbers of electric vehicles make die casting in aluminum necessary, since lightweight components help prolong battery life and make driving more enjoyable. Good dimensional accuracy in parts allows several components to be shaped into complex shapes, which then saves on costs by needing fewer processes and pieces. Aerospace Industry In aerospace, aluminum die casting is chosen because it gives the best strength and weight reduction. Customers turn to die-cast aluminium for aircraft frames, flight systems, gearbox coverings and engines. They are subjected to tough loads and various oil field conditions while staying the same size and remaining safe. Because of the process, parts for aerospace can be fully customized to meet high standards, all within a quicker timeframe and while working more efficiently. Because commercial and defence aviation is advancing, more demand for advanced aluminium parts is appearing. Consumer Electronics Aluminum die casting is popular in the consumer electronics industry for making parts that are both attractive, durable and good at handling heat. Internal parts of many laptops, tablets, smartphones, and camera bodies are commonly protected by die-cast aluminium housings which also give them an elegant appearance. Apart from how it lookaluminiumnum is great at conducting heat, so it’s often used in heat sinks and cooling systems. Because of die casting, small and complex designs can be manufactured, answering the industry’s desire for gadgets that use less power and take up less space. Lighting Industry There would be no excellent outdoors or industrial lighting without die-cast aluminum. Because of its advantages, aluminum is used to create street lights, LED covers and floodlight covers. That’s why lighting components can last a long time in all sorts of weather conditions. As a result, die casting makes it possible to put detailed features into a single part, so manufacturers may not have to add additional items or assemble different parts, saving them further money. Industrial machinery and equipment Aluminum die-cast parts are frequently employed in machines and equipment in industry because they last, offer high accuracy and protect against environmental damage. Examples of applications include pump housings, valve bases, gearboxes, motor cases and different structural components. Using this type of process allows the production of powerful parts that must function reliably in tough conditions.  Different Types of Aluminum Die Casting Different types of aluminum die casting are chosen based on what type of part, how many and the desired quality. Every process comes with specific pros, and one is picked depending on what the product requires. Die casting that uses high pressure (HPDC) Most of the time, high-pressure die casting is the process used. The aluminium is poured into the mould when pressured at a very high

L'avenir de la fabrication : Explorer le moulage sous pression de l'aluminium dans l'automobile

L'avenir de la fabrication : Explorer le moulage sous pression de l'aluminium dans l'automobile

fonte d'aluminium, moulage sous pression de l'aluminium
/

The rapid changes in the automotive industry mean car companies always need to build vehicles that are lighter, safer, and save energy. One key technology behind this change is automotive aluminum die casting. Thanks to this process, manufacturers can form metal parts that are both strong and light, maintaining the necessary complex figures and precision needed today in automotive work. As there is growing interest in EVs, improved security, and fuel savings, automotive die casting is now used more than ever. In die casting, aluminum is poured into a small, highly accurate steel mold at considerable force. The process allows for quick and regularly repeatable results and the parts have precise dimensions and look great. Right now, many die casting products are put to great use in important parts of cars such as engine blocks, transmission housings, car suspensions and battery enclosures. The construction must be solid, but it also has to meet high standards for heat and stress. Because people are choosing aluminum more than steel, many makers are turning to automotive aluminum die casting since it helps lower vehicle weight without hurting strength. Modern advances in machines, materials and sustainability make it possible for manufacturers to produce aluminium die casting parts for vehicles that satisfy modern regulations and please the environment. We go over the main ideas in automotive die casting which include materials, machines, design criteria and examples of their use. No matter if you work in the industry or not, understanding automotive die casting helps you see the evolution of manufacturing and the future of vehicles. What is the process known as automotive aluminum die casting? Automotive aluminum die casting takes place by injecting melting aluminum into steel dies using tremendous pressure. As soon as the aluminum becomes solid, it establishes a part that is both precise and tough, with a fine surface finish and good dimensions. Because safety, performance, and efficiency matter most in the automotive sector, these features are vital. This way of manufacturing helps produce complex designs that cannot be achieved with traditional production. Because it is light, using aluminum helps vehicles shed weight without becoming weaker. Design Engineering All automotive casting starts with a complete design and engineering phase. With 3D CAD software, engineers can make a model and test it to predict its actions in reality. The molding simulations show how molten metal is shaped inside the mold, how it will set, and where possible problems with air pockets or shrinkage could happen. The goal is to enhance the performance, strength, and ease of manufacturing of the part. The team also figures out the end joining process and the aluminum alloy suitable for the application. The process of making a Die (Mold) The design is followed by creating the die, which will shape the molten material in the process. These dies are expertly made to measure with tight tolerances and resist many casting attempts. Whether the job is complex or produced in high volume, the die may be made to work with more than one cavity. The die will also hold special channels for cooling and pins that will eject the part as soon as it is done solidifying. A well-designed die helps ensure the product is dimensionally accurate, has a good surface, and the tools last a long time. Adjust the Metal After that, aluminum ingots are melted further in industrial furnaces that work beyond 660°C (1220°F), the melting point for aluminum. The molten material is held at a constant temperature and is often freed from hydrogen, which might otherwise cause empty spaces inside. Sometimes chemicals are combined to provide extra strength, increased flexibility, or less susceptibility to corrosion of the aluminum. Since impurities in the molten metal may create flaws in the final item, the metal needs to be clean. Injection and Casting High-pressure die casting is a key process since the molten aluminum is shot into the mold at super-fast and extremely high pressure. Fast filling the metal into all corners of the die catches the tiny details from the part design. All the stress involved helps to reduce air pockets inside the components, which makes them powerful and solid. Just after the die is filled, the aluminum starts to cool and harden in only a few seconds. A fast initial cooling allows for a good grain structure and a perfect surface finish. Finished air tanks are sent through cooling and then ejected The air in the die is released and, with automated pins, the molded part is ejected after the aluminum has solidified. Throughout the die, temperature is controlled, and cycle times are cut down because of the cooling channels. The process at this phase requires attention because crooked cooling may result in either cracks or warping. Even after being ejected, the casting keeps its warmth and may undergo more treatment before entering the next step. The trimmers and finishers are part of this, too Often, in the casting process, some runner and flash pieces are left that have to be cut off. Trimming or machining the ends is how this is done. Sometimes, drilling, threading, surface grinding, or applying a coating is needed to finish the item accurately for its purpose. Sometimes, shops apply heat treatments to help increase a metal’s strength and ability to resist fatigue. After everything is finished, the parts are inspected for both inside and outside problems with measurements, X-rays, or ultrasonic machines. The assembly or shipping of objects is accomplished in stages A thorough check and finish mean the casting can either go to the customer or be carried forward for assembly systems. Before going into vehicles, the housing, brackets, and mounts are assembled with many other mechanical or electronic elements. Castings are best protected during transportation, and the supply chain moves smoothly if logistics and packing are effective. Benefits of Automotive Die Casting in the Automotive Industry More automakers are adopting aluminum components because of the benefits made possible by automotive die casting. The main benefit is that vehicles

Les 10 meilleurs services de moulage sous pression en Chine

Les 10 meilleurs services de moulage sous pression en Chine

Machines d'ingénierie chinoises, entreprises de moulage sous pression, Fabricant de pièces moulées sous pression
/

La Chine est connue pour sa position de leader mondial dans le secteur manufacturier, qui comprend l'industrie du moulage sous pression, qui dessert les secteurs de l'automobile, de l'aérospatiale, de l'électronique, des biens de consommation et de la machinerie industrielle. Toutes ces industries ont besoin de composants métalliques de haute qualité. De toutes les techniques de formage des métaux, le moulage sous pression est la plus reconnue individuellement pour sa capacité à atteindre des niveaux de précision élevés en matière de façonnage complexe, de finition de surface, de résistance et de rentabilité. En Chine, l'industrie des services de moulage sous pression sur mesure est en train d'acquérir un statut de classe mondiale grâce au marketing de précision et à l'accent mis sur la technologie par les entreprises les plus performantes. La création de prototypes pour les startups et les solutions de production évolutives pour les multinationales sont adaptées aux services offerts par les fournisseurs de services de moulage sous pression en Chine. Ils disposent de l'équipement et des capacités d'ingénierie nécessaires pour transformer les concepts en réalité. Nous allons maintenant nous pencher plus en détail sur les meilleurs d'entre eux et sur ce qui les distingue des autres concurrents mondiaux. Le choix d'un partenaire approprié pour le moulage sous pression en Chine peut avoir un impact stratégique sur la qualité, la rentabilité et la fiabilité de vos produits. Les principaux fabricants de moules sous pression en Chine offrent des services à valeur ajoutée qui vont au-delà du simple moulage sous pression. Ces services comprennent la consultation en matière de conception, la fabrication de moules, l'usinage CNC, la finition de surface, le contrôle de la qualité et même l'assemblage, tous réalisés en interne. Ils ont acquis une clientèle internationale grâce à leur capacité à produire régulièrement de gros volumes. Nous avons établi pour vous une liste des 10 meilleurs services de moulage sous pression en Chine en fonction de la sophistication de leurs équipements, de leur capacité de production et de leurs certifications (ISO 9001 et IATF 16949), ainsi que du retour d'information de leurs clients et de leur exposition aux affaires à l'étranger. Ces leaders de l'industrie s'engagent à améliorer l'efficacité des processus de production tout en répondant aux demandes en constante évolution des clients. Sincere Tech Année de création : 2005Nombre d'employés : 100-500Type d'entreprise : Fabrication de moules pour l'injection de plastique, moulage sous pression, usinage CNC, services d'assemblage Site Web et contact : Site Web : plasticmold.netEmail : info@plasticmold.netPhone : +86 135 30801277Adresse : Building 1, No. 30 Huan Zhen Rd, Shang Dong village, Qi Shi Town, Dongguan City, Guangdong province, China, 523000 Profil de l'entreprise Sincere Tech est l'un des leaders du moulage sous pression en Chine. Son siège est situé à Dongguan City, dans la province de Guangdong, et est équipé d'usines et d'une main-d'œuvre allant de 100 à 500 employés. Outre le moulage sous pression, les compétences de Sincere Tech comprennent le moulage par injection de plastique et l'usinage CNC, entre autres. Au fil des décennies, Sincere Tech s'est forgé une réputation de précision et de fiabilité en tant que fabricant sous contrat auprès de clients multinationaux dans les secteurs de l'automobile, de l'électronique, du médical, de l'industrie et de l'IAT. Engagements en matière de qualité Sincere Tech est certifiée ISO 9001 et, à ce titre, ses protocoles et ses contrôles internes sont soumis à des normes strictes. Cette certification garantit également que l'organisation s'aligne sur les normes internationales des systèmes de gestion de la qualité. Sincere Tech apporte une valeur ajoutée à ses clients en intégrant la qualité à chaque étape de la production, y compris la sélection des matières premières, l'outillage et la production, qui utilisent toutes des MMT et des projecteurs à la pointe de la technologie pour garantir des mesures précises. Pourquoi choisir Sincere Tech ? GC Precision Mould Co, Ltd Année de création : 1999Nombre d'employés : 100-200+Type d'activité : Moulage sous pression de l'aluminium, du zinc et du magnésium, usinage CNC, moulage par injection de plastique Site Web et contact : Site Web : aludiecasting.comEmail : info@aludiecasting.comPhone : +86 131 4886 5556Address : No. 30 Huan Zhen Rd, Qi Shi Town, Dongguan City, Guangdong province China, 523516 Profil de l'entreprise Fondée en 1999, GC Precision Mould Co. est basée à Dongguan City, Guangdong Province, China. Elle est spécialisée dans le moulage sous pression sur mesure et emploie entre 100 et 200 personnes. Elle propose des services de moulage sous pression de l'aluminium, du zinc et du magnésium, d'usinage CNC et de moulage par injection de plastique. Avec GC Precision, les clients peuvent obtenir des services complets, de la conception du moule à la production, que le projet soit simple ou complexe. Engagements en matière de qualité GC Precision maintient des prix compétitifs tout en offrant à ses clients des solutions de moulage sous pression personnalisées de haute qualité. L'entreprise suit les directives ISO 9001 et ses procédures de qualité, telles que l'inspection des moules, l'inspection du premier article, les inspections en cours de fabrication et l'inspection finale, garantissent que les exigences des clients sont toujours respectées. Pourquoi choisir GC Precision Mould ? CNM Tech Co. Année de création : il y a plus de 20 ansNombre d'employés : 100-400Type d'entreprise : Moulage sous pression de précision, usinage CNC, services d'assemblage Site Web et contact : Site Web : diecastingschina.comEmail : info@diecastingschina.comPhone : +86 130 4589 8002Address : Rm 101, No.40, Donghu road, Jinglian, Qiaotou town, Dongguan city, Guangdong Province, China. 523520. Profil de l'entreprise Peu après l'enregistrement de l'entreprise dans la ville de Dongguan, province de Guangdong, CNM Tech Co. s'est fait connaître dans l'industrie du moulage sous pression. Avec un effectif de 100 à 400 personnes, l'entreprise est spécialisée dans le moulage sous pression de l'aluminium, l'usinage CNC et l'assemblage à service complet. Elle s'adresse aux secteurs de l'automobile, de l'électronique, de la médecine et des produits de consommation. Engagements en matière de qualité Certifiée ISO 9001, CNM Tech garantit la qualité à chaque étape du processus. L'entreprise utilise des testeurs à ultrasons, des scanners 3D et des MMT pour effectuer des inspections approfondies à tous les stades de la production afin de garantir la précision et la qualité. Pourquoi choisir CNM Tech ? Sunrise Metal Technology Co. Année de création : 2010Nombre d'employés : 100-300Type d'entreprise : Fabricant de pièces moulées sur mesure en aluminium de haute précision, fournisseur de services d'usinage CNC et d'assemblage de produits. Site Web et contact : Site Web : sunrise-metal.comEmail : sales@sunrise-metal.comPhone : (+86)139 1265 1818Address : No 1456, Fushikang Road, Kunshan, Jiangsu, China (215300) Profil de l'entreprise Sunrise Metal Technology Co. Ltd. a commencé ses activités en 2010 et est basée à Shenzhen. L'entreprise se concentre sur des secteurs tels que le moulage sous pression de l'aluminium, le prototypage rapide, l'usinage CNC, la finition de surface, et est un fournisseur pour les industries médicales, automobiles, de télécommunication et de fabrication d'équipements industriels. Engagements en matière de qualité Sunrise Metal opère selon les normes ISO 9001:2015 et IATF 16949:2016. L'adhésion aux réglementations marque une vigilance stricte sur la précision des mesures. Des contrôles de qualité avancés tels que la simulation du flux des moules, les inspections aux rayons X, les mesures CMM et l'inspection du premier article (FAI) sont effectués. Pourquoi choisir Sunrise Metal Technology ? EMP Tech Co. Année de création : 1990Nombre d'employés : 500+Type d'entreprise : Fabricant professionnel de pièces moulées sous pression, spécialisé dans le moulage sous pression de l'aluminium, l'usinage CNC et l'assemblage de produits. Site Web et contact : Site Web : empcasting.comEmail : info@empcasting.comPhone : +86 180 3316 3576Address : NO.38 Duanzhou 3rd Road, Zhaoqing(526060), Guangdong, Chine. Profil de l'entreprise Créée en 1990, l'entreprise EMP Tech Co. est réputée pour ses services de moulage sous pression de l'aluminium de haute précision et ses services d'usinage CNC. EMP

Qu'est-ce que le zamak ? Qu'est-ce que c'est et pourquoi est-il largement utilisé dans l'industrie manufacturière ?

Qu'est-ce que le zamak ? Qu'est-ce que c'est et pourquoi est-il largement utilisé dans l'industrie manufacturière ?

zamak 5, zamak 2 die casting, zamak 3, zamak 3 die casting, Zamak 3 Zamak 3 Zamak 3 Zamak 3 Zamak 3
/

Alloys contribute significantly to the development of delicate electronic parts as well as heavy parts used in vehicles. For example, zamak metal has quietly changed the way many industries operate.  This metal is renowned because it is strong, can be molded easily and is versatile. The word Zamak originates from German and stands for zinc, aluminum, magnesium and copper. During the early years of the 20th century, the production of brass alloys aimed to improve on the brittleness found in previous zinc-based products. Today, zamak is used widely in vehicle, electronic device, and hardware manufacturing. It is appreciated both for its sturdy structure and for finishing smoothly with only a little work. Producing aluminum requires less energy than other materials since it melts easily, and it is also attractive because it can be recycled. Each different grade of zamak fits various needs, such as zamak 3 being softer than zamak 5, which is stronger than zamak 12. Most household goods and industrial products made with zamak metal meet the rising needs of manufacturing because they are practical and of good quality. Here, we will explain what zamak metal is made from, types such as zamak 3, zamak 5, and zamak 12, its functions, plus the positives and negatives. Zamak is a type of zinc alloy Zamak is made from zinc, mixed with a small amount of aluminum, magnesium, and copper. The word Zamak stands for Zink, Aluminum, Magnesium, and Kupfer, which are the German names for the metals involved. Due to its high-quality casting and appearance, zamak metal is popular in manufacturing automotive, electronic, furniture, and consumer goods. The process called die casting allows Zamak metal to shape complex, strong, and cost-efficient parts. Bending zamak into steel forms shaped like the finished goods is done at high pressure, producing many complex shapes very rapidly while needing only a minimal amount of machining. Because its melting temperature (around 385°C) is lower, zinc is more efficiently shaped than metals such as steel or aluminum in a foundry. What is Zamak, and how is it made? Zamak is a name formed from the German words for the main metals: Zink (zinc), Aluminium (aluminum), Magnesium, and Kupfer (copper). In the 1920s, the New Jersey Zinc Company created zamak to help overcome brittleness that affected some zinc alloys. It is viewed as a high-quality type of zinc that gives better die casting than most other materials. The usual elements in zamak metal are 96% zinc, 4% aluminum, a little bit of magnesium and some copper. As a result of this mix, its metal product is very strong, lasts a long time and can be formed into exact shapes with high precision. Key points about Zamak Metal A highlight of zamak metal is that it is very easy to cast. Manufacturers can create shapes with thin walls out of aluminum that would usually be pricey or difficult to produce using other materials. In addition, zamak has a polished surface, which makes it suitable for use in parts that need painting or plating. One more advantage is that steel retains its shape. Because Zamak does not change shape easily, it is commonly used in car and electronics manufacturing. The material is strong relative to its weight, making it attractive. Unlike aluminum, zamak does not weigh very little, but it offers a good level of durability that makes it useful for items that must be manageable. Uses of Zamak Metal Because it has great mechanical characteristics, zamak metal is applied in many products. In this industry, stainless steel is found in door handles, mirrors and several interior parts. A variety of electronic parts use Zamak because it is both precise and can resist heat. The furniture sector uses zamak because it is so versatile, fitting into hinges, brackets, and other decorations. Many fancy pieces in fashion include zamak since it is shiny and does not get tarnished easily. The process of making Zamak metal by casting 1. Alloy Preparation To produce zamak metal, you need to combine zinc, aluminum, magnesium and copper in the right ratios. To extract metals from these ones, the raw materials are melted at moderate temperatures. The right ratios are necessary to ensure that zamak 3, zamak 5 and zamak 12 provide the desired qualities. 2. Melting The blend of materials is put into a furnace and brought up to the zamak melting point of 385°C (725°F). During this step, the alloy flows very well and is therefore excellent for high-pressure die casting. 3. Die Casting The zamak is melted and then put into a die casting machine to be injected into a metal mold. Thanks to this process, items are shaped into very detailed and sturdy forms. Depending on how the casting will be used, manufacturers select from products classified as zamak 3, zamak 5, or zamak 12, since each is meant for a different purpose. 4. Injection and Outflow As soon as the zamak is injected, cooling the mold causes the metal to harden fast. After removing the part from the mold, it may not need machining because the alloy has a clean finish. 5. Finished and Plated When the model is cast, it might be polished, painted, or electroplated in materials such as nickel or chrome. The processes improve the look and resilience to corrosion of the manufactured product, mostly when used outside. Applications of Zamak Metal Zamak metal is used in several industries because of its superior casting, its strong properties and attractive smoothness. Even in the automotive industry, zamak metal plays a key role by being useful and attractive. 1. Automotive Industry Many door handles, emblems, mirror housings and interior details in motor vehicles are manufactured using zamak metal. Because it can be designed intricately and held to small measurements, it’s useful in parts that are either noticeable or not. The reason Zamak 5 is used most often here is that it is more durable and wears less easily. 2. Consumer Electronics Its stable dimensions and smooth appearance

Retour en haut

Obtenir un devis